RSS Feed Email Facebook Twitter Stumbleupon Google Bookmark

SolidWorks 2014 Part II - Advanced Techniques

SolidWorks 2014 Part II - Advanced Techniques
Price: $28.42 Save $46.58!
Buy Now

SolidWorks 2014 Part II - Advanced Techniques picks up where SolidWorks 2014 Part I - Basic Tools leaves off. Its aim is to take you from an intermediate user with a basic understanding of SolidWorks and modeling techniques to an advanced user capable of creating complex models and able to use the advanced tools provided by SolidWorks. The text covers parts, surfaces, SimulationXpress, sheet metal, top-down assemblies and core and cavity molds.

Every lesson and exercise in this book was created based on real world projects. Each of these projects have been broken down and developed into easy and comprehensible steps for the reader. Furthermore, at the end of every chapter there are self test questionnaires to ensure that the reader has gained sufficient knowledge from each section before moving on to more advanced lessons. This book takes the approach that in order to understand SolidWorks, inside and out, the reader should create everything from the beginning and take it step by step.

Table of Contents

  1. Introduction to 3D Sketch
  2. Plane Creation
  3. Advanced Modeling 5/8 Spanner
  4. Sweep with Composite Curves Helical Ext. Spring
  5. Using Variable Pitch
  6. Advanced Modeling with Sweep & Loft
  7. Loft vs. Sweep Water Meter Housing
  8. Loft with Guide Curves Waved Washer
  9. Advanced Sweep - Wire Form
  10. Using Surfaces Advanced Modeling
  11. Lofted Surface Remote Control Casing
  12. Advanced Surfaces Offset Surface & Ruled Surface
  13. Using the Deform Feature
  14. Using Filled Surfaces
  15. Boundary and Freeform Surfaces
  16. Sweep with Solid Body
  17. Surfaces vs. Solid Modeling Safety Helmet
  18. Using PhotoView 360
  19. SimulationXpress 5/8 Spanner
  20. Sheet Metal Parts Post Cap
  21. Sheet Metal Parts Vents
  22. Sheet Metal Forming Tools Button with Slots
  23. Designing Sheet Metal Parts Mounting Tray
  24. Sheet Metal Conversions
  25. Sheet Metal Gussets
  26. Flat Pattern Stent
  27. Stent Sample - Sheet Metal Approach
  28. Working with Sheet Metal STEP Files
  29. Adding Parts to the Toolbox Library
  30. Weldments Structural Members
  31. Top-Down Assembly
  32. Core & Cavity Assembly Level
  33. Core & Cavity Part Level
  34. Top-Down Assembly - Miniature Vise
  35. Top-Down Assembly Water Control Valve
  36. External References & Repair Errors

By: Paul Tran, Published 2014-01-02 by SDC Publications

Certain content that appears here comes from Amazon Services LLC. This content is provided 'as is' and is subject to change or removal at any time. Pricing and availability accurate as of 2018-12-16 09:36am CST; please follow the links for current pricing.